eINK 2.00 inch display

eINK click is an adapter Click boardâ„¢, used to interface a compatible eINK display with the host MCU.

click Product page

Click library

• Author : MikroE Team
• Date : Feb 2020.
• Type : SPI type

Software Support

We provide a library for the Eink200Inch Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

This library contains API for Eink200Inch Click driver.

Standard key functions :

• Config Object Initialization function.

  void eink_200inch_cfg_setup ( eink_200inch_cfg_t *cfg );

• Initialization function.

  EINK_200INCH_RETVAL eink_200inch_init ( eink_200inch_t ctx, eink_200inch_cfg_t cfg );

Example key functions :

• Set LUT table

  void eink200_set_lut ( eink_200inch_t ctx, const uint8_t lut, uint8_t n_bytes );

• Displays image

  void eink200_display_image ( eink_200inch_t ctx, const uint8_t image_buffer );

• Set text font

  void eink200_set_font ( eink_200inch_t ctx, eink_200inch_font_t cfg_font );

Examples Description

This application demonstrates the use of eINK click board.

The demo application is composed of two sections :

Application Init

Initializes the driver and configures the click board for 2.00 inch eINK display. After that, if the TEXT mode is supported, shows a desired text messages on the display.

void application_init ( void )
{
    eink_200inch_cfg_t cfg;   
    eink_200inch_font_t cfg_font;
    eink_200_text_set_t text_set;

    //  Click initialization.

    eink_200inch_cfg_setup( &cfg );
    EINK_200INCH_MAP_MIKROBUS( cfg, MIKROBUS_1 );
    eink_200inch_init( &eink_200inch, &cfg );

    eink200_start_config( &eink_200inch );
    eink200_set_lut( &eink_200inch, EINK200_LUT_TABLE, 90 );
    Delay_ms( 1000 );

#ifndef IMAGE_MODE_ONLY
    cfg_font.p_font = &guiFont_Tahoma_10_Regular[ 0 ];
    cfg_font.color = EINK200_SCREEN_COLOR_WHITE;
    cfg_font.orientation = EINK200_FO_HORIZONTAL;  
    eink200_set_font( &eink_200inch, &cfg_font );

    text_set.n_char = 4;
    text_set.text_x = 10;
    text_set.text_y = 50;
    eink200_text( &eink_200inch, &demo_text[ 0 ], &text_set );
    text_set.n_char = 7;
    text_set.text_x = 10;
    text_set.text_y = 90;
    eink200_text( &eink_200inch, &demo_text1[ 0 ], &text_set );
    text_set.n_char = 8;
    text_set.text_x = 10;
    text_set.text_y = 130;
    eink200_text( &eink_200inch, &demo_text2[ 0 ], &text_set ); 
    Delay_ms( 5000 );
#endif
}

Application Task

Draws two demo images to the display with a one-second delay between each drawing.

void application_task ( void )
{
    eink200_display_image ( &eink_200inch, demo_image_black );
    Delay_1sec( );
    eink200_display_image ( &eink_200inch, demo_image_white );
    Delay_1sec( );
}

Note

Due to insuficient RAM memory, only the IMAGE mode is supported with 8-bit PIC microcontrollers.

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.Eink200Inch

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.