We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.16
mikroSDK Library: 2.0.0.0
Category: FRAM
Downloaded: 333 times
Not followed.
License: MIT license
Download [340.73KB]FRAM Click is a Click board™ that carries a ferroelectric RAM module. Ferroelectric RAM, also known as FRAM, is a non-volatile memory type, with characteristics comparable to much faster DRAM memory modules.
[learn more]
Author: MIKROE
Last Updated: 2018-07-12
Package Version: 1.0.0.1
mikroSDK Library: 1.0.0.0
Category: Optical
Downloaded: 7818 times
Followed by: 1 user
License: MIT license
Download [2.48MB]IrDA2 click features the TFDU4101 infrared transceiver module as well as MCP2120 infrared encoder/decoder from Microchip connected with the 7.3728 MHz external crystal. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target board via UART interface and the following mikroBUSâ„¢ pins: AN, RST, CS.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.14
mikroSDK Library: 2.0.0.0
Category: SRAM
Downloaded: 223 times
Not followed.
License: MIT license
Download [403.93KB]EERAM 5V Click is a static RAM (SRAM) memory Click board™ with the unique feature - it has a backup non-volatile memory array, used to store the data from the SRAM array. Since the SRAM is not able to maintain its content after the power loss, the non-volatile EEPROM backup can be a very handy addition that can be used to preserve the data, even after the power loss event. This is a very useful feature when working with critical or sensitive applications. The memory backup procedure can be executed both automatically and manually. When it is set to work in the manual mode, the onboard capacitor will act as a power source with enough power to complete the backup cycle. The power-on backup restore mode is also available, taking only about 25ms to complete.
[learn more] Author: MIKROE
Last Updated: 2018-01-29
Package Version: 1.0.0.0
mikroSDK Library: 1.0.0.0
Category: Temperature & humidity
Downloaded: 5480 times
Not followed.
License: MIT license
Download [2.96MB]Temp-Hum 4 click is a smart environmental temperature and humidity sensor Click board, packed with features, that allow easy and simple integration into any design that requires accurate and reliable humidity and temperature measurements.
[learn more] 
Author: Ercan Koçlar
Last Updated: 2018-03-11
Package Version: 1.0.0.1
Category: Timers (Real time clock)
Downloaded: 778 times
Not followed.
License: MIT license
Download [6.61KB]DS1307 Gerçek Zamanlı Saat entegresi kontrol kütüphanesi
- Saniye/Dakika/Saat/Gün/Ay/Yıl -belirleme ve okuma
- 2 adet Alarm Fonksiyonu
- timer veya interrupt kullanmaz
DS1307 RTC driver library
- Seconds / Minutes / Hours / Day / Month / Year -set and read
- 2 Alarm Functions
-not use timer or interrupt
ADD SOURCE CODE !
Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.18
mikroSDK Library: 2.0.0.0
Category: FLASH
Downloaded: 341 times
Not followed.
License: MIT license
Download [364.01KB]Flash Click is 8,388,608 bits (8 Mbit) on a Click board, organized into 1,048,576 bytes (1 MB). In other words, this Click board is a Flash memory medium with the capacity of 1 MB. The used Flash module has very good endurance and it can withstand up to 100,000 write cycles, with the data retention period of about 20 years.
[learn more] Author: MIKROE
Last Updated: 2018-03-10
Package Version: 1.0.0.1
mikroSDK Library: 1.0.0.0
Category: Current
Downloaded: 12045 times
Followed by: 2 users
License: MIT license
Download [2.37MB]This code demonstrates communication via <b>4-20mA</b> Transmitter click board.
MCU reads temperature from the DS1820 sensor and prints it on the LCD.
Also display shows expected current which should be measured with multimeter.
Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.17
mikroSDK Library: 2.0.0.0
Category: FLASH
Downloaded: 345 times
Not followed.
License: MIT license
Download [399.22KB]Flash 2 Click features a 64 Mbit Flash memory IC, manufactured by using the proprietary high-performance CMOS Super-Flash® technology, which allows the Flash 2 Click to withstand up to 100,000 write cycles, with the data retention period of 100 years, which is considerably longer than any other memory module of this type. The flash memory IC used on this Click board™ features Serial Flash Discoverable Parameters (SFDP) mode, used to retrieve the advanced information from the device, such as the operating characteristics, structure and vendor specified information, memory size, operating voltage, timing information, and more.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.18
mikroSDK Library: 2.0.0.0
Category: Biometrics
Downloaded: 505 times
Not followed.
License: MIT license
Download [474.79KB]Heart Rate Click is a heart rate monitoring and pulse oximetry measuring Click board™. It features an advanced oximeter and heart rate monitoring sensor, which relies on two integrated LEDs, a photosensitive element, and a very accurate and advanced low noise analog front end, to provide clean and accurate readings.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.12
mikroSDK Library: 2.0.0.0
Category: Measurements
Downloaded: 187 times
Not followed.
License: MIT license
Download [586.02KB]HZ to V Click is a device that can converts input frequency of the signal with virtually any wave shape to a DC voltage output, with a level proportional to the input frequency. It has a linear response, and by applying a signal with the frequency between 1kHz to 10kHz on its input, the Click board™ will generate a DC voltage, ranging from 0.33V to 3.3V.
[learn more] 
