20%
We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.4
mikroSDK Library: 2.0.0.0
Category: Measurements
Downloaded: 52 times
Not followed.
License: MIT license
Download [572.52KB]Current Sens 2 Click is a compact add-on board designed for precise current measurements in industrial applications. This board features the HO 10-P, an AC/DC current transducer from LEM USA.
[learn more]
Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.4
mikroSDK Library: 2.0.0.0
Category: Measurements
Downloaded: 17 times
Not followed.
License: MIT license
Download [545.33KB]CDC Click is a compact add-on board that allows your application do a conversion of capacitance to a digital format. This board features the PCAP04, a capacitance-to-digital converter (CDC) from ScioSense. It also includes an integrated digital signal processor (DSP) for on-chip data post-processing. The converter has high flexibility and allows you to convert grounded capacitors and floating capacitors to a digital format. It has up to 50KHz sampling rate in up to 20-bit resolution.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.4
mikroSDK Library: 2.0.0.0
Category: Measurements
Downloaded: 26 times
Not followed.
License: MIT license
Download [467.53KB]RMS to DC 2 Click is a compact add-on board that converts the RMS of the input signal into a DC voltage. This board features the AD8436, a low-cost, low-power, true RMS-to-DC converter from Analog Devices. The AD8436 is a translinear precision, low-power, true RMS-to-DC converter that delivers true RMS or average rectified value of AC waveform. It features high accuracy, a wide dynamic input range (100μV rms to 3V rms), a wide bandwidth of up to 1MHz, and more. This Click board™ makes the perfect solution for the development of various true RMS digital multimeter applications, panel meters and gauges, AC + DC measurement applications, a true RMS measurement of an audio signal, and other similar applications that require accurate RMS value readings.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.4
mikroSDK Library: 2.0.0.0
Category: Measurements
Downloaded: 76 times
Not followed.
License: MIT license
Download [490.38KB]Zero-Cross Click is a compact add-on board that has the ability to detect the change from positive to negative or negative to a positive level of a sinusoidal waveform. This board features circuitry that provides Zero Crossing Detection (ZCD). Whenever the sine wave crosses the ground potential, the output shifts from HIGH logic to LOW or vice-versa.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.4
mikroSDK Library: 2.0.0.0
Category: Measurements
Downloaded: 32 times
Not followed.
License: MIT license
Download [283.06KB]Wheatstone Click is a measurement Click board™ which utilizes a Wheatstone bridge circuit onboard, in order to precisely measure the resistance of an external element. Besides the wheatstone bridge circuit, this Click board™ also utilizes MAX4208 – an ultra-low offset/drift, precision instrumentation amplifier, from Maxim Integrated.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.5
mikroSDK Library: 2.0.0.0
Category: Measurements
Downloaded: 112 times
Not followed.
License: MIT license
Download [581.96KB]PWR Meter 3 Click is a compact add-on board that measures voltage and current through the connected load. This board features the ACS37800, an I2C-configurable power monitoring solution from Allegro MicroSystems, which simplifies the addition of power monitoring to many AC/DC powered systems. The ACS37800’s Hall-effect-based current sensing technology achieves reinforced isolation ratings (4800 VRMS) alongside a reliable ±90A bidirectional current sensing. It also has two LED indicators for the realization of visual detection of some anomalies in operation, such as under/overvoltage and fast overcurrent fault detection.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.7
mikroSDK Library: 2.0.0.0
Category: Measurements
Downloaded: 50 times
Not followed.
License: MIT license
Download [569.84KB]Current 9 Click is a compact add-on board providing a precise and accurate current sensing solution. This board features the CT415-HSN830DR, high-bandwidth and ultra-low-noise XtremeSense® TMR current sensor designed for the current range up to 30A from Crocus Technology. This sensor also features an integrated current-carrying conductor which handles rated current and generates a current measurement as a linear analog output voltage, accomplishing a total output error of about ±1% full-scale. After that, the user is allowed to process the output voltage in analog or digital form.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.4
mikroSDK Library: 2.0.0.0
Category: Measurements
Downloaded: 39 times
Not followed.
License: MIT license
Download [539.81KB]Analog MUX 4 Click is a compact add-on board that switches one of many analog inputs to one digital output. This board features the TMUX1308, a general-purpose 8:1 single-ended CMOS multiplexer (MUX) from Texas Instruments. The TMUX1308 has an internal injection current control which eliminates the need for external diode and resistor networks to protect the switch and keep the input signals within the supply voltage. It also supports bidirectional analog and digital signals ranging from 0 to 5V, alongside several protection features allowing a reliable operation and protecting the device from potential damage.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.5
mikroSDK Library: 2.0.0.0
Category: Measurements
Downloaded: 69 times
Not followed.
License: MIT license
Download [475.74KB]V to Hz 3 Click is a compact add-on board that converts an analog voltage input signal into a specific frequency pulse wave signal. This board features the AD7740, an ultrasmall synchronous voltage-to-frequency converter from Analog Devices. The AD7740 has a linear response, so applying a voltage from 3V up to 5V on its VIN terminal will generate the pulse with a frequency linearly proportional to the input voltage. It contains an integrated 2.5V bandgap reference defining the span of the VFC and can be overdriven using an external reference. The full-scale output frequency is synchronous with the input clock signal provided by the LTC6903 programmable oscillator, with a maximum input frequency of 1MHz. Based on the analog input value, the output frequency goes from 10% to 90% of the input frequency.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.7
mikroSDK Library: 2.0.0.0
Category: Measurements
Downloaded: 48 times
Not followed.
License: MIT license
Download [468.22KB]Analog MUX 5 Click is a compact add-on board that switches one of many inputs to one output. This board features the MAX4634, a fast, low-voltage four-channel CMOS analog multiplexer from Analog Devices. This low-voltage multiplexer operates from both mikroBUS™ power rails and features 4Ω maximum ON-resistance (RON). CMOS switch construction allows the processing of analog signals within the supply voltage range. It is also characterized by an easy way of management, only through a couple of signals from the mikroBUS™ socket. This Click board™ is suitable for various applications, from industrial and instrumentation to medical, consumer, communications, and more.
[learn more] 
