We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.7
mikroSDK Library: 2.0.0.0
Category: Optical
Downloaded: 64 times
Not followed.
License: MIT license
Download [465.31KB]IrDA2 click features the TFDU4101 infrared transceiver module as well as MCP2120 infrared encoder/decoder from Microchip connected with the 7.3728 MHz external crystal. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target board via UART interface and the following mikroBUS™ pins: AN, RST, CS.
[learn more]
Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.12
mikroSDK Library: 2.0.0.0
Category: Optical
Downloaded: 87 times
Not followed.
License: MIT license
Download [486.18KB]IrDA 3 click is an intelligent IR transceiver device that can both send and receive UART commands via the IR interface. IrDA 3 click features both the IR transceiver and the encoder/decoder IC, used to convert the UART data and send or receive it in IrDA® compatible format. IrDA 3 click also has an onboard clock generator for the fastest possible UART performance of 115,200 bps, so it does not need an additional clock signal to be generated by the MCU.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.9
mikroSDK Library: 2.0.0.0
Category: CAN
Downloaded: 116 times
Not followed.
License: MIT license
Download [491.43KB]I2C to CAN Click is a compact add-on board that contains I2C to CAN-physical transceiver, which extends a single-master I2C bus through harsh or noisy environments. This board features the LT3960, a robust high-speed transceiver that extends a single-master I2C bus up to 400kbps using the CAN-physical layer from Analog Devices. One LT3960 from SCL and SDA I2C lines creates equivalent differential buses (CAN) on two twisted pairs, while the second LT3960 recreates the I2C bus locally for any slave I2C devices on the other end of the twisted pairs. A built-in 3.3V LDO powers both the I2C and CAN lines from a single input supply from 4V to 60V. This Click board™ is suitable for industrial and automotive networking, remote sensor applications, and more.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.14
mikroSDK Library: 2.0.0.0
Category: Temperature & humidity
Downloaded: 89 times
Followed by: 1 user
License: MIT license
Download [381.78KB]Temp&Hum 17 Click is a compact add-on board that represents temperature and humidity sensing solutions. This board features the HS3001, a highly accurate, fully calibrated relative humidity and temperature sensor from Renesas. It features proprietary sensor-level protection, ensuring high reliability and long-term stability. Integrated calibration and temperature-compensation logic provides fully corrected RH and temperature values via standard I2C output. No user calibration of the output data is required.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.13
mikroSDK Library: 2.0.0.0
Category: USB
Downloaded: 143 times
Not followed.
License: MIT license
Download [480.66KB]USB UART 4 click offers a USB to asynchronous serial data (UART) interface, allowing the microcontroller based designs to communicate with the personal computer, in a very simple way. It is equipped with the FT232RL, a very popular USB to UART interface IC, used on many MikroElektronika devices - both for its reliability and simplicity. USB UART click is used for whenever there is a need to seamlessly and effortlessly interface the UART lines to a personal computer
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.12
mikroSDK Library: 2.0.0.0
Category: USB
Downloaded: 177 times
Not followed.
License: MIT license
Download [557.91KB]USB UART 2 click provides USB isolation and carries the ADUM4160BRWZ USB port isolator. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over UART interface, with additional functionality provided the following pins on the mikroBUS™ line: RST, CS, PWM, INT.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.12
mikroSDK Library: 2.0.0.0
Category: Battery Charger
Downloaded: 66 times
Not followed.
License: MIT license
Download [474.14KB]Charger 16 Click is a compact add-on board that represents a single-cell battery charger. This board features the LT1571, a constant-current/constant-voltage battery charger with preset voltage and termination flag from Analog Devices.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.8
mikroSDK Library: 2.0.0.0
Category: LoRa
Downloaded: 92 times
Not followed.
License: MIT license
Download [676.51KB]LR 2 Click is a compact add-on board that contains a low-power, long-range transceiver. This board features the RN2903, RF technology-based SRD transceiver, which operates at a frequency of 915MHz from Microchip Technology. This Click board™ features an embedded LoRaWAN Class A compliant stack, providing a long-range spread spectrum communication with high interference immunity. The RN2903 module is fully compliant with the United States (FCC) and Canada (IC) regulations combined with the advanced and straightforward command interface allowing easy integration into the final application.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.12
mikroSDK Library: 2.0.0.0
Category: Buck
Downloaded: 48 times
Not followed.
License: MIT license
Download [446.01KB]Buck 10 Click is a high-efficiency step-down converter which provides a highly regulated output voltage derived from the connected power source, rated from 4V to 18V. The regulated output voltage can be selected between two values: 3.3V and 5V. These are voltage values that are most commonly used in many embedded designs. This click is based around an integrated DC-DC converter, labeled as MPM3632C.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.11
mikroSDK Library: 2.0.0.0
Category: Buck
Downloaded: 61 times
Not followed.
License: MIT license
Download [474.24KB]Buck 9 Click is a high-efficiency step-down converter which provides a highly regulated output voltage derived from the connected power source, rated from 4V to 36V. The regulated output voltage can be selected between two values: 3.3V and 5V. These are voltage values that are most commonly used in many embedded designs. Buck 9 click is based around an integrated DC-DC converter, labeled as MP9943.
[learn more] 
