We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Author: MIKROE
Last Updated: 2024-11-05
Package Version: 2.1.0.1
mikroSDK Library: 2.0.0.0
Category: Port expander
Downloaded: 21 times
Not followed.
License: MIT license
Download [730.41KB]DIGI I/O Click is a compact add-on board for flexible industrial digital input and output control. This board features the MAX14906, a quad-channel industrial digital input/output IC from Analog Devices, compliant with IEC 61131-2 standard. Each channel can be individually configured as a high-side switch, push-pull driver, or digital input, supporting various operating modes with current limiting up to 1.2A and fast signal transmission. The board supports 24V operation by default, with options for individual channel power configuration, and includes built-in diagnostics like overvoltage and undervoltage detection, thermal overload, and wire-break detection. DIGI I/O Click is ideal for industrial automation, motor control systems, PLCs, and Distributed Control Systems (DCS).
[learn more]
Author: MIKROE
Last Updated: 2024-11-05
Package Version: 2.1.0.1
mikroSDK Library: 2.0.0.0
Category: Port expander
Downloaded: 17 times
Not followed.
License: MIT license
Download [646.10KB]Expand 18 Click is a compact add-on board used for expanding the I/O capabilities of various microcontroller (MCU) systems. This board features the PCAL9714, an ultra-low-voltage 14-bit SPI I/O expander from NXP. This board supports both 3.3V and 5V logic levels, features integrated level shifting for mixed-voltage systems, and operates via a high-speed 5MHz SPI interface. Additionally, it offers Agile I/O capabilities such as programmable output drive strength, latchable inputs, and interrupt management. Expand 18 Click is ideal for interfacing MCUs with sensors, keypads, and push buttons in power-sensitive applications.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.2
mikroSDK Library: 2.0.0.0
Category: Port expander
Downloaded: 14 times
Not followed.
License: MIT license
Download [520.92KB]Expand 17 Click is a compact add-on board designed to expand the number of input/output pins in your system. This board features the TCAL6408, an 8-bit I/O expander from Texas Instruments, which communicates via the I2C protocol. The TCAL6408 features programmable output drive strength, latchable inputs, pull-up/pull-down resistors, and configurable open-drain or push-pull outputs, offering flexible and enhanced I/O performance with minimal power consumption and reduced EMI.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.2
mikroSDK Library: 2.0.0.0
Category: Port expander
Downloaded: 21 times
Not followed.
License: MIT license
Download [500.89KB]Expand 19 Click is an add-on board that provides additional input/output capabilities for various applications. This board features the TCAL9538, an 8-bit I2C-bus I/O expander from Texas Instruments. The board features eight configurable I/O pins that can be set as inputs or outputs, with polarity inversion, programmable output drive strength, and interrupt functionality for real-time event handling. It operates using a standard 2-wire I2C communication interface, supporting clock frequencies up to 1MHz, and includes an onboard interrupt pin for efficient system integration.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.3
mikroSDK Library: 2.0.0.0
Category: Port expander
Downloaded: 52 times
Not followed.
License: MIT license
Download [681.40KB]DIGI IN 2 Click is a compact add-on board designed for converting high-voltage industrial signals into logic-level outputs, ideal for enhancing industrial control systems. This board features the MAX22196, a high-performance octal industrial sink/source digital input IC from Analog Devices. This Click board™ stands out for its ability to interface eight industrial inputs (8V-24V) via SPI, configurable as either sinking or sourcing with built-in current limiters, ensuring adherence to IEC 61131-2 standards.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.9
mikroSDK Library: 2.0.0.0
Category: Port expander
Downloaded: 94 times
Not followed.
License: MIT license
Download [643.52KB]DIGI IN Click is a compact add-board that converts industrial inputs into serialized SPI-compatible output. This board features the MAX22199, an octal industrial digital input from Analog Devices. It stands out for its compliance with the IEC 61131-2 standard, ensuring reliability and efficiency.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.6
mikroSDK Library: 2.0.0.0
Category: Port expander
Downloaded: 51 times
Not followed.
License: MIT license
Download [501.03KB]Expand 16 Click is a compact add-on board with a multi-port I/O expander. This board features the FLX6408, a fully configurable 8-bit GPIO expander from ON Semiconductor. It brings eight independently configurable input/output ports, with a 6mA output drive, when configured in the output mode.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.4
mikroSDK Library: 2.0.0.0
Category: Port expander
Downloaded: 47 times
Not followed.
License: MIT license
Download [485.91KB]Expand 3 Click is a compact add-on board providing general-purpose I/O expansion. This board features the DS2408, an 8-channel programmable I/O expander from Analog Devices. The DS2408 has a factory-lasered 64-bit registration number, enabling multiple Expand 3 Click boards™ to be connected on the same data line, communicating with the host MCU through a standard Dallas Semiconductor 1-Wire interface (15.3kbps or 100kbps). PIO outputs are configured as open-drain and provide a maximum on-resistance of 100Ω.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.5
mikroSDK Library: 2.0.0.0
Category: Port expander
Downloaded: 62 times
Not followed.
License: MIT license
Download [625.44KB]DIGI Isolator 2 Click is a compact add-on board that provides isolated digital input signals to your application. This board features the ISO1228, an eight-channel isolated digital input from Texas Instruments. It comes with 8-channel isolated 24V digital input receivers, with a current limit and diagnostics. The device also provides a field-side input-current-powered LED indication to reduce system power dissipation and reduce the board temperatures.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.6
mikroSDK Library: 2.0.0.0
Category: Port expander
Downloaded: 87 times
Not followed.
License: MIT license
Download [619.78KB]DIGI Isolator Click is a compact add-on board that provides electrical isolation and signal conditioning for the serial peripheral interface and a UART interface. This board features two DCL540C01, high-speed, quad-channel digital isolators from Toshiba Semiconductor. Depending on the usage, this CMOS isolator can achieve data rates of up to 150Mbps, while withstanding up to 5kVrms voltage. DIGI Isolator Click is designed to isolate two additional IO pins besides SPI and UART interfaces.
[learn more] 
