We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.2
mikroSDK Library: 2.0.0.0
Category: Magnetic
Downloaded: 26 times
Not followed.
License: MIT license
Download [504.16KB]3D Hall 14 Click is a compact add-on board designed for high-precision position sensing in various applications. This board features the MLX90394, a 3-axis magnetometer from Melexis based on the Triaxis® Hall technology. The MLX90394 offers low power consumption, excellent noise performance, and flexible measurement modes, including intelligent wake-up functions for efficient power management. It communicates via a standard 2-Wire I2C interface and supports fast-mode frequencies up to 1MHz.
[learn more]
Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.8
mikroSDK Library: 2.0.0.0
Category: Measurements
Downloaded: 36 times
Not followed.
License: MIT license
Download [606.93KB]PWR Meter 3 Click - 30A is a compact add-on board that measures voltage and current through the connected load. This board features the ACS37800KMACTR-030B3-I2C, an I2C-configurable power monitoring solution from Allegro MicroSystems, which simplifies the addition of power monitoring to many AC/DC powered systems. The ACS37800KMACLU-090B3-I2C Hall-effect-based current sensing technology achieves reinforced isolation ratings (4800 VRMS) alongside a reliable ±30A bidirectional current sensing. It also has two LED indicators for the realization of visual detection of some anomalies in operation, such as under/overvoltage and fast overcurrent fault detection.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.3
mikroSDK Library: 2.0.0.0
Category: Stepper
Downloaded: 40 times
Not followed.
License: MIT license
Download [541.62KB]Stepper 24 Click is a compact add-on board designed to drive small stepping motors in consumer electronics and industrial equipment applications. This board features the TB67S589FTG, a BiCD constant-current 2-phase bipolar stepping motor driver IC from Toshiba Semiconductor. Key features include a PWM chopper-type 2-phase bipolar drive system, high withstand voltage of up to 34V operating, and a maximum operating current of 2.7A per phase. The board also integrates safety mechanisms such as over-temperature, over-current, and low-supply voltage detection. Additional control is provided by the PCA9555A port expander via I2C, enabling functions like decay and torque modes, step resolution settings, and many more.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.3
mikroSDK Library: 2.0.0.0
Category: Stepper
Downloaded: 39 times
Not followed.
License: MIT license
Download [541.76KB]Stepper 23 Click is a compact add-on board designed to drive small stepping motors in consumer electronics and industrial equipment applications. This board features the TB67S569FTG, a BiCD constant-current 2-phase bipolar stepping motor driver IC from Toshiba Semiconductor. Key features include a PWM chopper-type 2-phase bipolar drive system, high withstand voltage of up to 34V operating, and a maximum operating current of 1.8A per phase. The board also integrates safety mechanisms such as over-temperature, over-current, and low-supply voltage detection. Additional control is provided by the PCA9555A port expander via I2C, enabling functions like decay and torque modes, step resolution settings, and many more.
[learn more] Author: MIKROE
Last Updated: 2024-07-09
Package Version: 2.0.0.12
mikroSDK Library: 2.0.0.0
Category: Ethernet
Downloaded: 27 times
Not followed.
License: MIT license
Download [13.17KB] Author: MIKROE
Last Updated: 2024-07-09
Package Version: 2.0.0.11
mikroSDK Library: 2.0.0.0
Category: Ethernet
Downloaded: 23 times
Not followed.
License: MIT license
Download [13.80KB] Author: MIKROE
Last Updated: 2024-07-09
Package Version: 2.0.0.11
mikroSDK Library: 2.0.0.0
Category: Ethernet
Downloaded: 25 times
Not followed.
License: MIT license
Download [14.25KB] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.3
mikroSDK Library: 2.0.0.0
Category: Temperature & humidity
Downloaded: 115 times
Not followed.
License: MIT license
Download [513.44KB]Temp&Hum 25 Click is a compact add-on board designed for precise temperature and humidity monitoring. This board features the SHT33-DIS-B2.5KS, a high-reliability, third-generation relative humidity and temperature sensor from Sensirion. This sensor offers exceptional accuracy and reliability, with a range of 0-100% RH and -40 to +125°C, and features ISO17025-certified calibration, CMOSens® technology, and NIST-traceability. The board supports the new Click Snap feature, allowing easy detachment of the sensor area for flexible use.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.3
mikroSDK Library: 2.0.0.0
Category: Proximity
Downloaded: 46 times
Not followed.
License: MIT license
Download [410.96KB]Proximity 19 Click is a compact add-on board designed for precise proximity sensing in various applications. This board features the RPR-0720, a digital optical proximity sensor from ROHM Semiconductor. The RPR-0720 integrates an infrared VCSEL (IrVCSEL) and an IC with an I2C interface, featuring a detection range adjustable from 1 to 15mm and an ambient light canceling function. The board uses a 2-wire I2C interface for communication, supporting up to 400kHz frequency clock, allowing control over sensor functions such as operating mode, interrupt system, and offset/threshold adjustments.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.3
mikroSDK Library: 2.0.0.0
Category: LED matrix
Downloaded: 52 times
Not followed.
License: MIT license
Download [554.82KB]1x4 RGB Click is a compact add-on board that creates vivid and dynamic lighting effects. This board features the LP5812, an advanced RGB LED driver from Texas Instruments. It features ultra-low operation current, an autonomous animation engine, and support for both analog and PWM dimming. The board operates with 3.3V or 5V logic voltage levels and communicates with the host MCU via a standard 2-wire I2C interface. It is suitable for portable and wearable electronics, gaming, home entertainment, IoT, networking, industrial HMI, and many more.
[learn more] 
