20%
We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.2
mikroSDK Library: 2.0.0.0
Category: BT/BLE
Downloaded: 9 times
Not followed.
License: MIT license
Download [452.78KB]BT Audio 2 Click is Bluetooth audio stream add on board based on BM62 module from Microchip. It's a Stereo Audio module which is fully qualified Bluetooth v5.0 dual-mode (BDR/EDR/BLE) to be added in any wireless audio and voice application. With features like high resolution up to 24-bit, 96 kHz audio data format, Bluetooth Low Energy data rate up to 1Mbits/s, connection of two hosts with HFP/A2DP profiles simultaneously, seamless serial data over UART interface and many more it's perfect solution for applications like portable speakers and headsets.
[learn more]
Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.4
mikroSDK Library: 2.0.0.0
Category: BT/BLE
Downloaded: 39 times
Not followed.
License: MIT license
Download [512.68KB]ANNA-B412 Click is a compact add-on board that provides BT/BLE connectivity for any embedded application. This board features the ANNA-B412, a standalone Bluetooth 5.1 low-energy module from u-blox. It is a System-in-Package (SiP) design with pre-flashed u-connectXpress software, which supports Bluetooth LE Serial port service, GATT client and server, Bluetooth beacons, Bluetooth long-range, NFC, and simultaneous peripheral and central roles. The Bluetooth module in LE mode can achieve up to 2Mbps data rates.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.4
mikroSDK Library: 2.0.0.0
Category: BT/BLE
Downloaded: 35 times
Not followed.
License: MIT license
Download [618.01KB]NanoBeacon Click is a compact add-on board that provides a powerful and efficient Bluetooth beacon solution. This board features the IN100, an ultra-low power Bluetooth 5.3 Beacon SoC from InPlay, that sets a new standard in beacon technology. Its ultra-low power consumption, enhanced privacy mode, and three beacon modes offer seamless compatibility with no Bluetooth programming required - plug and play. Its compact design houses two types of built-in memory (4Kb OTP and 4KB SRAM), UART and I2C interfaces, and a hardware security engine.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.3
mikroSDK Library: 2.0.0.0
Category: BT/BLE
Downloaded: 55 times
Not followed.
License: MIT license
Download [338.66KB]BLE 6 Click is a Bluetooth low energy system-on-chip application processor certified module, compliant with BT specifications v5.0 and BQE qualified. The featured BlueNRG-M2 module developed by STMicroelectronics supports multiple roles simultaneously and can act at the same time as Bluetooth master and slave device.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.13
mikroSDK Library: 2.0.0.0
Category: BT/BLE
Downloaded: 22 times
Not followed.
License: MIT license
Download [330.77KB]Bluetooth 2 Click features WT41u, a long range class 1, Bluetooth® 2.1 + EDR module from Silicon Labs. WT41u is a highly integrated and sophisticated Bluetooth® module, containing all the necessary elements from Bluetooth® radio and a fully implemented protocol stack. Therefore WT41u provides an ideal solution for developers who want to integrate Bluetooth® wireless technology into their design with limited knowledge of Bluetooth® and RF technologies. WT41u optimized for long range applications is available with an integrated chip antenna.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.8
mikroSDK Library: 2.0.0.0
Category: BT/BLE
Downloaded: 71 times
Not followed.
License: MIT license
Download [522.99KB]BLE 10 Click is a compact add-on board that provides BT/BLE connectivity for any embedded application. This board features the PAN1780-AT, a Bluetooth® 5 Low Energy Module based on Nordic's nRF52840 single-chip controller from Panasonic.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.11
mikroSDK Library: 2.0.0.0
Category: BT/BLE
Downloaded: 174 times
Not followed.
License: MIT license
Download [731.67KB]BT Audio 3 Click is a compact add-on board with high-performing voice and audio post-processing capability for Bluetooth audio applications. This board features the BM83, a fully certified Bluetooth v5.0 stereo audio module from Microchip. The BM83 contains an onboard Bluetooth stack and audio profiles and supports 24-bit/96 kHz high-resolution audio formats to enable high-fidelity wireless audio. An integrated Digital Signal Processor (DSP) decodes AAC and SBC codecs and executes advanced audio and voice processing such as Wide-Band (WB) speech, Acoustic Echo Cancellation (AEC), and Noise Reduction (NR). Configured in Host mode, the BM83 allows data processing via the UART interface, and in addition, comes with many additional features such as audio control buttons, onboard microphones, LED indicators, and more.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.12
mikroSDK Library: 2.0.0.0
Category: BT/BLE
Downloaded: 106 times
Not followed.
License: MIT license
Download [580.18KB]BLE 12 Click is a compact add-on board that provides BT/BLE connectivity for any embedded application. This board features the BM832A, a powerful and highly flexible, ultra low power Bluetooth Low Energy (BLE) module from Fanstel. Based on the Nordic nRF52 SoC, the BM832A supports Bluetooth 5.0 Low-Energy (BLE) connectivity while delivering RF range and performance, debugging and enhanced security features, and low power consumption. It also comes with an ARM Cortex™ M4(F) MCU up to 192kB flash and 24kB RAM, embedded 2.4GHz multi-protocol transceiver, and an integrated PCB trace antenna. This Click board™ is suitable for low-cost Bluetooth low energy applications such as building automation and sensor networks, portable medical, connected home, and more.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.9
mikroSDK Library: 2.0.0.0
Category: BT/BLE
Downloaded: 77 times
Not followed.
License: MIT license
Download [552.08KB]BT Click is a compact add-on board targeted for applications that require both Bluetooth Smart and Classic connectivity. This board features the BT121, a dual-mode Bluetooth Smart Ready module solution that gives unparalleled flexibility to integrate both Bluetooth Smart and Bluetooth Basic Rate/Enhanced Data Rate (BR/EDR) wireless technologies from Silicon Labs.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.15
mikroSDK Library: 2.0.0.0
Category: BT/BLE
Downloaded: 97 times
Not followed.
License: MIT license
Download [533.41KB]Bluetooth 2 Click features WT41u, a long range class 1, Bluetooth® 2.1 + EDR module. WT41u is a highly integrated and sophisticated Bluetooth® module, containing all the necessary elements from Bluetooth® radio and a fully implemented protocol stack. Therefore WT41u provides an ideal solution for developers who want to integrate Bluetooth® wireless technology into their design with limited knowledge of Bluetooth® and RF technologies. WT41u optimized for long range applications is available with an integrated chip antenna. By default, the WT41u module is equipped with powerful and easy-to-use iWRAP firmware which enables users to access Bluetooth® functionality with simple ASCII commands delivered to the module over serial interface - it's just like a Bluetooth® modem.
[learn more] 
