20%
We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.9
mikroSDK Library: 2.0.0.0
Category: Pushbutton/Switches
Downloaded: 55 times
Not followed.
License: MIT license
Download [504.84KB]Joystick 3 Click is a compact add-on board that can fulfill your directional analog input needs. This board features 2765, a high-quality mini 2-axis analog output thumbstick from Adafruit Industries. This small joystick is a 'self-centering' analog-type with a black rocker cap similar to the PSP joysticks. It comprises two 10kΩ potentiometers, one for up/down and another for left/right direction. Knowing that this joystick represents an analog type, it connects with mikroBUS™ through the SPI interface through the MCP3204 12-bit A/D converter.
[learn more]
Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.6
mikroSDK Library: 2.0.0.0
Category: Pushbutton/Switches
Downloaded: 50 times
Not followed.
License: MIT license
Download [477.94KB]Thumbwheel click is a mikroBUS add-on board with a 10-position rotary sprocket connected to a 1-Wire 8-Channel Addressable Switch
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.12
mikroSDK Library: 2.0.0.0
Category: Pushbutton/Switches
Downloaded: 93 times
Not followed.
License: MIT license
Download [379.57KB]Button R click is the simplest solution for adding a single pushbutton to your design. The button itself is transparent, 6.8mm in diameter and has a red LED backlight. When pressed, it sends an interrupt signal to the target board microcontroller. The backlight LED is controlled separately through the mikroBUS PWM pin, so you can program all kinds of patterns (varying level of light intensity or rate of blinking on subsequent button presses). The board can use either a 3.3V or a 5V power supply.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.11
mikroSDK Library: 2.0.0.0
Category: Pushbutton/Switches
Downloaded: 88 times
Not followed.
License: MIT license
Download [374.86KB]Button G click is the simplest solution for adding a single pushbutton to your design. The button itself is transparent, 6.8mm in diameter and has a green LED backlight. When pressed, it sends an interrupt signal to the target board microcontroller. The backlight LED is controlled separately through the mikroBUS PWM pin, so you can program all kinds of patterns (varying level of light intensity or rate of blinking on subsequent button presses). The board can use either a 3.3V or a 5V power supply.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.11
mikroSDK Library: 2.0.0.0
Category: Pushbutton/Switches
Downloaded: 61 times
Not followed.
License: MIT license
Download [450.06KB]Button Y click is a Click board™ equipped with the tactile switch, sometimes referred to as a pushbutton. A pushbutton is a component that is used very often in various designs, allowing the user to interact with the application. Although it sounds simple, a button needs to comply with a range of application requirements. It needs to have a very good mechanical endurance while retaining its specifications, a predictable bouncing time, a very low ON resistance, very high OFF resistance, and it needs to fulfill aesthetical requirements.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.20
mikroSDK Library: 2.0.0.0
Category: Pushbutton/Switches
Downloaded: 110 times
Not followed.
License: MIT license
Download [529.53KB]Analog Key Click is an analog keyboard on a Click board. It contains six tactile pushbuttons, used to select one of six different voltage levels. The idea behind this click is very simple: six resistors form a voltage divider.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.16
mikroSDK Library: 2.0.0.0
Category: Pushbutton/Switches
Downloaded: 104 times
Not followed.
License: MIT license
Download [346.43KB]Tamper click is equipped with SDS001, a low profile side-actuated detect switch, made by C&K company. This is a high-quality, low-current detection switch, which is designed in a form of a push button. The switch itself is very small - only 2mm of switch overtravel length, which coupled with its low actuation force, makes it ideal for using it as a contact detector in various applications - consumer electronics devices, medical devices, smart card detection and similar applications.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.15
mikroSDK Library: 2.0.0.0
Category: Pushbutton/Switches
Downloaded: 200 times
Not followed.
License: MIT license
Download [633.67KB]4x4 Key click carries a 16 button keypad. The design of the board — inputs are read by a pair of connected 8-bit parallel-in serial-out shift registers — allows for multiple key presses at the same time.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.15
mikroSDK Library: 2.0.0.0
Category: Pushbutton/Switches
Downloaded: 104 times
Not followed.
License: MIT license
Download [360.24KB]Tamper 2 click contains a levered D2HW-A221D switch by Omron, which outputs signal in both positions - pressed and released.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.14
mikroSDK Library: 2.0.0.0
Category: Pushbutton/Switches
Downloaded: 121 times
Not followed.
License: MIT license
Download [473.45KB]Joystick click is a smart navigation key concept based on contactless, magnetic movement detection.
[learn more] 
