We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.3
mikroSDK Library: 2.0.0.0
Category: Boost
Downloaded: 30 times
Not followed.
License: MIT license
Download [615.09KB]BATT Boost 2 Click is a compact add-on board designed to extend the battery life of non-rechargeable, primary batteries in low-voltage, low-power applications. This board features the NBM7100A, a coin-cell battery-life booster with adaptive power optimization from Nexperia. The NBM7100A integrates two high-efficiency DC-DC conversion stages and an intelligent learning algorithm to optimize energy usage, allowing it to handle bursts of current up to 200mA without depleting the battery. It features two output terminals: VDH for high pulse load applications and VDP for powering 'Always-ON' components. Communication with the host MCU is achieved via the I2C interface, supporting up to 1MHz clock frequencies.
[learn more]
Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.3
mikroSDK Library: 2.0.0.0
Category: Boost
Downloaded: 39 times
Not followed.
License: MIT license
Download [390.14KB]Boost 11 Click is a compact add-on board that boosts low input voltages to a stable output. This board features the XCL105B331H2-G, a synchronous step-up DC/DC converter from TOREX Semi. It operates from an input voltage as low as 0.9V, ideal for devices using single Alkaline or Nickel-metal hydride batteries, with an output fixed at 3.3V. It features an EN pin for easy start-up and standby mode and supports both 3.3V and 5V logic levels. This versatility makes Boost 11 Click suitable for industrial equipment, IoT devices, wearables, and applications prioritizing battery life.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.3
mikroSDK Library: 2.0.0.0
Category: Boost
Downloaded: 39 times
Not followed.
License: MIT license
Download [493.60KB]Step Up 2 Click is a compact add-on board designed to boost the power capabilities of devices. This board features the TPS61299, a synchronous boost converter from Texas Instruments. This component is renowned for its low quiescent current and high efficiency under light-load conditions. The board distinguishes itself with the ability to adjust output voltage via the integrated MAX5419 digital potentiometer, offering precise control through an I2C interface. It supports external voltages from 0.2V to 5.5V, delivering a regulated output range of 1.8V to 5.5V.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.4
mikroSDK Library: 2.0.0.0
Category: Boost
Downloaded: 81 times
Not followed.
License: MIT license
Download [632.89KB]BATT Boost Click is a compact add-on board that expands a coin battery cell's lifetime and current capability, like the CR2032 and lithium thionyl batteries. This board features the NBM5100A, a coin-cell battery life booster with adaptive power optimization from Nexperia. It is a battery energy management device designed to maximize usable capacity from non-rechargeable, primary batteries when used in low-voltage, low-power applications requiring burst current loads. The devices overcome voltage drop and battery life limitations associated with extracting high pulse currents.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.8
mikroSDK Library: 2.0.0.0
Category: Boost
Downloaded: 113 times
Not followed.
License: MIT license
Download [478.59KB]Boost-INV 3 Click is a compact add-on board designed to supply positive/negative-driven applications. This board features the TPS65132, a dual-output power supply from Texas Instruments. The TPS65132 uses a single inductor scheme for both outputs to provide the user with the smallest solution size and high efficiency.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.8
mikroSDK Library: 2.0.0.0
Category: Boost
Downloaded: 96 times
Not followed.
License: MIT license
Download [473.04KB]Boost 7 Click is a compact add-on board that steps up the voltage from its input (supply) to its output (load). This board features the BD8316GWL, a dual DC/DC converter from Rohm Semiconductor. Each converter inside the BD8316GWL is designed with up to 200mA current limit generating well-regulated positive and negative outputs of ±3.3V or ±5V, making the BD8316GWL ideal for various applications. In addition to the possibility of working with both mikroBUS™ power rails, it also provides the opportunity of using an external power supply with a very low voltage of 2.5V.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.8
mikroSDK Library: 2.0.0.0
Category: Boost
Downloaded: 167 times
Not followed.
License: MIT license
Download [462.59KB]Boost 8 Click is a compact add-on board that steps up the voltage from its input (supply) to its output (load).
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.15
mikroSDK Library: 2.0.0.0
Category: Boost
Downloaded: 176 times
Not followed.
License: MIT license
Download [441.99KB]Boost 3 Click is a compact add-on board that contains a boost converter with an integrated current mirror function. This board features the TPS61391, a 700-kHz pulse-width modulating (PWM) Step-Up converter with a 70V switch FET with an input voltage up to 5.5V from Texas Instruments.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.22
mikroSDK Library: 2.0.0.0
Category: Boost
Downloaded: 195 times
Not followed.
License: MIT license
Download [619.84KB]Boost-INV 2 Click is a very useful DC/DC voltage converter device, as can output both positive and negative voltage, boosted up to 15V and inverted to -15V, from a single fixed voltage input.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.17
mikroSDK Library: 2.0.0.0
Category: Boost
Downloaded: 193 times
Not followed.
License: MIT license
Download [566.26KB]Boost Click provides an adjustable output voltage through the onboard DAC that drives the FB pin of the MIC2606 to set desired output voltage.
[learn more] 
