We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Rating:
Author: MIKROE
Last Updated: 2019-09-16
Package Version: 1.0.0.0
mikroSDK Library: 1.0.0.0
Category: Stepper
Downloaded: 2742 times
Not followed.
License: MIT license
Stepper 13 Click is a bipolar step motor driver. It features an H-bridge bipolar step motor driver, which supports full-, half-, quarter-, or eighth-step modes.
Do you want to subscribe in order to receive notifications regarding "Stepper 13 click" changes.
Do you want to unsubscribe in order to stop receiving notifications regarding "Stepper 13 click" changes.
Do you want to report abuse regarding "Stepper 13 click".
Library Description
Library carries everything needed for stepper motor control including speed and acceleration setup. Library is also adjustable to working on different amount of ticks per second, also speed and acceleration can be provided in float format. Buffer used for movement calculation is defined by user so this library can be adjusted for MCUs with very limited RAM resources. Check documentation for more details how to use it.
Key functions:
uint8_t stepper13_setSpeed( float minSpeed, float maxSpeed, float accelRatio, T_STEPPER13_OBJ obj )
- Setup motor speeduint8_t stepper13_setRoute( const uint8_t direction, uint32_t steps, T_STEPPER13_OBJ obj )
- Setup new routevoid stepper13_start( T_STEPPER13_OBJ obj )
- Start motor movementExamples description
The application is composed of three sections :
void applicationTask()
{
stepper13_start( (T_STEPPER13_OBJ)&myStepper );
while ( myStepper.status.running )
{
stepper13_process( (T_STEPPER13_OBJ)&myStepper );
}
Delay_ms( 2000 );
stepper13_start( (T_STEPPER13_OBJ)&myStepper );
Delay_ms( 1000 );
stepper13_stop( (T_STEPPER13_OBJ)&myStepper );
Delay_ms( 2000 );
}
In addition to library function calls example carries necessay Timer ISR and Timer initialization. Check Timer initialization setings and update it according to your MCU - Timer Calculator.
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 click or RS232 click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message.