We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Rating:
Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.5
mikroSDK Library: 2.0.0.0
Category: Port expander
Downloaded: 57 times
Not followed.
License: MIT license
DIGI Isolator 2 Click is a compact add-on board that provides isolated digital input signals to your application. This board features the ISO1228, an eight-channel isolated digital input from Texas Instruments. It comes with 8-channel isolated 24V digital input receivers, with a current limit and diagnostics. The device also provides a field-side input-current-powered LED indication to reduce system power dissipation and reduce the board temperatures.
Do you want to subscribe in order to receive notifications regarding "DIGI Isolator 2 Click" changes.
Do you want to unsubscribe in order to stop receiving notifications regarding "DIGI Isolator 2 Click" changes.
Do you want to report abuse regarding "DIGI Isolator 2 Click".
DOWNLOAD LINK | RELATED COMPILER | CONTAINS |
---|---|---|
5530_digi_isolator_2_.zip [625.44KB] | mikroC AI for ARM GCC for ARM Clang for ARM mikroC AI for PIC mikroC AI for PIC32 XC32 GCC for RISC-V Clang for RISC-V mikroC AI for AVR mikroC AI for dsPIC XC16 |
|
DIGI Isolator 2 Click is a compact add-on board that provides isolated digital input signals to your application. This board features the ISO1228, an eight-channel isolated digital input from Texas Instruments. It comes with 8-channel isolated 24V digital input receivers, with a current limit and diagnostics. The device also provides a field-side input-current-powered LED indication to reduce system power dissipation and reduce the board temperatures.
We provide a library for the DIGI Isolator 2 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
This library contains API for DIGI Isolator 2 Click driver.
digiisolator2_cfg_setup
Config Object Initialization function.
void digiisolator2_cfg_setup ( digiisolator2_cfg_t *cfg );
digiisolator2_init
Initialization function.
err_t digiisolator2_init ( digiisolator2_t *ctx, digiisolator2_cfg_t *cfg );
digiisolator2_default_cfg
Click Default Configuration function.
err_t digiisolator2_default_cfg ( digiisolator2_t *ctx );
digiisolator2_enable_output
This function enables output by setting the EN pin to high state.
void digiisolator2_enable_output ( digiisolator2_t *ctx );
digiisolator2_disable_output
This function disables output by setting the EN pin to low state.
void digiisolator2_disable_output ( digiisolator2_t *ctx );
digiisolator2_read_inputs
This function reads all inputs state via the selected driver interface.
err_t digiisolator2_read_inputs ( digiisolator2_t *ctx, uint8_t *data_out );
This example demonstrates the use of DIGI Isolator 2 Click board by reading and displaying the state of 8 digital input channels.
The demo application is composed of two sections :
Initializes the driver and enables isolator outputs.
void application_init ( void )
{
log_cfg_t log_cfg; /**< Logger config object. */
digiisolator2_cfg_t digiisolator2_cfg; /**< Click config object. */
/**
* Logger initialization.
* Default baud rate: 115200
* Default log level: LOG_LEVEL_DEBUG
* @note If USB_UART_RX and USB_UART_TX
* are defined as HAL_PIN_NC, you will
* need to define them manually for log to work.
* See @b LOG_MAP_USB_UART macro definition for detailed explanation.
*/
LOG_MAP_USB_UART( log_cfg );
log_init( &logger, &log_cfg );
log_info( &logger, " Application Init " );
// Click initialization.
digiisolator2_cfg_setup( &digiisolator2_cfg );
DIGIISOLATOR2_MAP_MIKROBUS( digiisolator2_cfg, MIKROBUS_1 );
if ( DIGIISOLATOR2_OK != digiisolator2_init( &digiisolator2, &digiisolator2_cfg ) )
{
log_error( &logger, " Communication init." );
for ( ; ; );
}
digiisolator2_enable_output( &digiisolator2 );
log_info( &logger, " Application Task " );
}
Reads the state of 8 digital input channels in hex format where MSB represents IN8 and LSB the channel IN1. The results are displayed on the USB UART every 500ms.
void application_task ( void )
{
uint8_t input_data = 0;
if ( DIGIISOLATOR2_OK == digiisolator2_read_inputs ( &digiisolator2, &input_data ) )
{
log_printf( &logger, " INPUT: 0x%.2X\r\n\n", ( uint16_t ) input_data );
Delay_ms ( 500 );
}
}
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
Other Mikroe Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART Click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.