20%
We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.4
mikroSDK Library: 2.0.0.0
Category: Current sensor
Downloaded: 26 times
Not followed.
License: MIT license
Download [496.08KB]Hall Current 18 Click is a compact add-on board that contains a precise solution for AC/DC current sensing. This board features the MCS1806, an isolated Hall-effect current sensor from MPS. The sensor is immune to external magnetic fields via differential sensing and has no magnetic hysteresis. The MCS1806 features galvanic isolation between the pins of the primary conductive path and the sensor leads, allowing it to replace optoisolators and other isolation devices.
[learn more]
Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.5
mikroSDK Library: 2.0.0.0
Category: Current sensor
Downloaded: 22 times
Not followed.
License: MIT license
Download [585.85KB]Hall Current 17 Click is a compact add-on board that contains a precise solution for AC/DC current sensing. This board features the ACS37010, a high-accuracy current sensor from Allegro MicroSystems. The ACS37010 has a high operating bandwidth of 450kHz and a fast response time of 1.3μs response time. It features a highly isolated compact surface-mount package, low internal primary conductor resistance, low sensitivity error, low offset voltage over temperature, and more.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.4
mikroSDK Library: 2.0.0.0
Category: Current sensor
Downloaded: 27 times
Not followed.
License: MIT license
Download [608.01KB]Hall Current 16 Click is a compact add-on board that contains a precise solution for AC/DC current sensing. This board features the ACS37002, a 400kHz high-accuracy current sensor from Allegro Microsystems. This sensor features pin-selectable gains that can be used to configure the device to one of the four defined sensitivities and corresponding current ranges, increasing design flexibility. In addition, an adjustable overcurrent fast fault provides short-circuit detection.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.4
mikroSDK Library: 2.0.0.0
Category: Current sensor
Downloaded: 53 times
Not followed.
License: MIT license
Download [580.83KB]Hall Current 14 Click is a compact add-on board that contains a precise solution for AC/DC current sensing. This board features the MCS1801, a fully integrated Hall-effect-based isolated linear current sensor designed for the current range of ±25A from Monolithic Power Systems (MPS). The galvanic isolation between the pins of the primary copper conductive path and the sensor leads allows the MCS1801 to replace optoisolators or other isolation devices. Applied current flowing through this copper conduction path generates a magnetic field that the differential Hall sensors convert into a proportional voltage, where after that, the user is given the option to process the output voltage as an analog or digital value.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.5
mikroSDK Library: 2.0.0.0
Category: Current sensor
Downloaded: 48 times
Not followed.
License: MIT license
Download [494.62KB]Hall Current 15 Click is a compact add-on board that provides precise AC or DC current-sensing solution. This board features the TMCS1101-Q1, a galvanically isolated Hall-effect current sensor capable of DC or AC current measurement with high accuracy, excellent linearity, and temperature stability from Texas Instruments. A low-drift, temperature-compensated signal chain provides <1.5% full-scale error across a broad operating temperature range. It also provides a reliable 600V lifetime working voltage and 3kVRMS isolation between the current path and circuitry with uni/bidirectional current sensing. Besides, the user is allowed to process the output signal in analog or digital form.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.5
mikroSDK Library: 2.0.0.0
Category: Current sensor
Downloaded: 46 times
Not followed.
License: MIT license
Download [472.82KB]Current 7 Click is a compact add-on board providing a precise and accurate current sensing solution. This board features the INA282, a wide common-mode range, bidirectional, high-accuracy current shunt monitor from Texas Instruments. The INA282 represents a voltage output current shunt monitor that can sense drops across shunts at common-mode voltages from –14 V to +80 V, independent of the supply voltage, which operates in a range from 2.7V up to 18V supply. The zero-drift topology enables high-precision measurements with maximum input offset voltages as low as 70μV. Also, the user is allowed to process the output signal in analog or digital form.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.6
mikroSDK Library: 2.0.0.0
Category: Current sensor
Downloaded: 80 times
Not followed.
License: MIT license
Download [486.15KB]Current 6 Click is a compact add-on board providing a precise and accurate current sensing solution. This board features the MAX40080, a fast-response bi-directional current-sense amplifier from Analog Devices. The device features ultra-low 5uV input offset voltage, very-low 0.2% gain error, and includes an analog-to-digital converter with programmable sample rate and 12-bit resolution featuring I2C compatible interface. It also features a wake-up current-threshold and auto-shutdown mode when the I2C is inactive, both designed to minimize power consumption. The current-shunt monitor can measure voltage signals on common-mode voltages ranging from -0.1V (ground sensing) to 36V, independent of the supply voltage. This Click board™ delivers higher performance to industrial control and automation applications, load and power supplies monitoring, telecom equipment, and many more.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.9
mikroSDK Library: 2.0.0.0
Category: Current sensor
Downloaded: 61 times
Not followed.
License: MIT license
Download [557.05KB]Hall Current 13 Click is a compact add-on board that provides economical and precise AC or DC current sensing solutions. This board features the TMCS1107-Q1, a galvanically isolated Hall-effect current sensor capable of DC or AC current measurement with high accuracy, excellent linearity, and temperature stability from Texas Instruments. It enables the lowest drift, <3% full-scale error, and highest accuracy over time and temperature. It also provides a reliable 420V lifetime working voltage and 3kVRMS isolation between the current path and circuitry with uni/bidirectional current sensing. Besides, the user is allowed to process the output signal in analog or digital form.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.6
mikroSDK Library: 2.0.0.0
Category: Current sensor
Downloaded: 50 times
Not followed.
License: MIT license
Download [537.05KB]Current 5 Click is a compact add-on board that provides a precise and accurate current sensing solution. This board features the INA381, a high-speed current-sense amplifier with an integrated comparator from Texas Instruments. This device has selectable operating modes (transparent or latched) and detects overcurrent conditions by measuring the voltage developed across a current shunt resistor. Then it compares that voltage to a user-defined threshold limit set by the comparator reference potentiometer. The current-shunt monitor can measure differential voltage signals on common-mode voltages that vary from –0.2V to 26V, independent of the supply voltage. This Click board™ delivers higher performance to applications such as test and measurement, load and power supplies monitoring, low-side phase motor control, and many more.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.7
mikroSDK Library: 2.0.0.0
Category: Current sensor
Downloaded: 69 times
Not followed.
License: MIT license
Download [584.58KB]Hall Current 12 Click is a compact add-on board that provides economical and precise AC or DC current sensing solutions. This board features the TMCS1100, a galvanically isolated Hall-effect current sensor capable of DC or AC current measurement with high accuracy, excellent linearity, and temperature stability from Texas Instruments. It enables the lowest drift, <1% full-scale error, and highest accuracy over time and temperature. It also provides a reliable 600V lifetime working voltage and 3kVRMS isolation between the current path and circuitry with uni/bidirectional current sensing. Besides, the user is allowed to process the output signal in analog or digital form.
[learn more] 
