We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Author: MIKROE
Last Updated: 2024-11-05
Package Version: 2.1.0.3
mikroSDK Library: 2.0.0.0
Category: Relay
Downloaded: 1 time
Not followed.
License: MIT license
Download [445.64KB]SolidSwitch 8 Click is a compact add-on board for reliable load control in automotive and industrial applications. This board features the BTS3035EJXUMA1, a smart low-side switch from Infineon. It features a 35mΩ N-channel MOSFET, capable of handling load voltages from 6V to 18V and currents up to 5A, making it suitable for various resistive, inductive, and capacitive loads. The board includes essential protection mechanisms like overtemperature shutdown, overvoltage protection, and current limitation, ensuring reliable operation under demanding conditions. With integrated feedback through an open-drain status pin and a red LED indicator for visual alerts, it enhances diagnostics and safety.
[learn more]
Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.2
mikroSDK Library: 2.0.0.0
Category: Relay
Downloaded: 16 times
Not followed.
License: MIT license
Download [716.67KB]SolidSwitch 6 Click is a compact add-on board for reliable load management in automotive power distribution systems. This board features the VNF1048F, a high-side switch controller with intelligent e-fuse protection from STMicroelectronics. This board supports an input voltage range of 6V to 48V, controls external MOSFET, and offers essential protection features such as overcurrent, under-voltage, and thermal shutdown, with diagnostic feedback via SPI. It also includes an NTC resistor for monitoring MOSFET temperature and operates with either 3.3V or 5V logic levels.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.3
mikroSDK Library: 2.0.0.0
Category: Relay
Downloaded: 35 times
Not followed.
License: MIT license
Download [606.99KB]Relay 7 Click is a compact add-on board for precise load control and monitoring applications. This board features four CRR05-1As, a CRR series reed relay from Standex Electronics, well-known for its ultra-miniature SMD design and high insulation resistance. These four relays each have four load connection terminals and orange LED indicators that signal the operational status, ensuring clear and immediate feedback. These relays are highly reliable and come in a rugged thermoset over-molded package with ceramic substrate and a typical 1013Ω insulation resistance. They support a coil voltage of 5VDC and switching capabilities up to 170VDC/0.5A/10W. It is ideally suited for test and measurement (ATE) equipment, instrumentation, and telecommunications.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.3
mikroSDK Library: 2.0.0.0
Category: Relay
Downloaded: 40 times
Not followed.
License: MIT license
Download [609.89KB]Relay 6 Click is a compact add-on board for precise load control and monitoring applications. This board features four 9913-05-20TRs, a reed relay from Coto Technology, well-known for its ultra-miniature SMD design, which offers the smallest footprint in the market. These four relays each have four load connection terminals and blue LED indicators that signal the operational status, ensuring clear and immediate feedback.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.5
mikroSDK Library: 2.0.0.0
Category: Relay
Downloaded: 70 times
Not followed.
License: MIT license
Download [561.50KB]IPD Click is a compact add-on board for controlling inductive and resistive loads in industrial automation and other demanding applications. This board features the TPD2017FN, an 8-channel low-side switch with MOSFET outputs from Toshiba Semiconductor.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.5
mikroSDK Library: 2.0.0.0
Category: Relay
Downloaded: 72 times
Not followed.
License: MIT license
Download [561.40KB]IPD Click is a compact add-on board for controlling inductive and resistive loads in industrial automation and other demanding applications. This board features the TPD2015FN, an 8-channel high-side switch with MOSFET outputs from Toshiba Semiconductor.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.8
mikroSDK Library: 2.0.0.0
Category: Relay
Downloaded: 148 times
Not followed.
License: MIT license
Download [603.23KB]Timer Relay Click is a compact add-on board that allows you to control the load with a timer. This board features the NE5555, a precision timer from Diodes Incorporated. It is a precision timing circuit capable of producing accurate time delays in a monostable mode of operation.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.7
mikroSDK Library: 2.0.0.0
Category: Relay
Downloaded: 137 times
Not followed.
License: MIT license
Download [583.26KB]Relay 5 Click is a compact add-on board with general-purpose relays that any host MCU can control. This board features three J1031C3VDC.15S, a high-current single-pole double-throw (SPDT) signal relays controlled by the PCA9538A, a low-voltage 8-bit I/O port expander from NXP Semiconductors. Highly sensitive, the J1031C3VDC.15S offers a low coil power consumption in a small, lightweight package with PC pin mounting. It comes with a dimension of 12.5x7.5x10 millimeters (LxWxH) and a 1C contact arrangement with a coil voltage of 3VDC, providing a maximum switching voltage of 125VAC/60VDC.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.8
mikroSDK Library: 2.0.0.0
Category: Relay
Downloaded: 100 times
Not followed.
License: MIT license
Download [524.62KB]Relay 4 Click is a compact add-on board with a general-purpose relay that any host MCU can control. This board features the J1031C3VDC, high-current single-pole double-throw (SPDT) signal relay from CIT Relay and Switch. Highly sensitive, the J1031C3VDC offers a low coil power consumption in a small, lightweight package with PC pin mounting. It comes with a dimension of 12.5x7.5x10 millimetre (LxWxH) and a 1C contact arrangement with a coil voltage of 3VDC, providing a switching voltage of 125VAC/60VDC maximum.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.10
mikroSDK Library: 2.0.0.0
Category: Relay
Downloaded: 123 times
Not followed.
License: MIT license
Download [583.19KB]SolidSwitch 2 Click is a compact add-on board that contains a load switching device. This board features the L9026, an automotive eight-channel relay driver from STMicroelectronics. The L9026 incorporates two high-side drivers and six configurable high-side/low-side drivers driven by an SPI interface or by two dedicated parallel inputs. Operating from an external power supply from 3V up to 18V, it provides a maximum current of 1A on its output terminals. It also offers advanced diagnostic and protection features such as short-to-ground, open load, overcurrent, and overtemperature detections.
[learn more] 
