We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Rating:
Author: MIKROE
Last Updated: 2019-03-08
Package Version: 1.0.0.1
mikroSDK Library: 1.0.0.0
Category: Temperature & humidity
Downloaded: 4620 times
Not followed.
License: MIT license
THERMO K click carries the MCP9600 IC from Microchip and and depending on the type of probe it uses the click can measure temperatures from −200 °C to +1372 °C. The click is designed to run either on 3.3V or 5V power supply. It communicates with the target MCU through I2C interface.
Do you want to subscribe in order to receive notifications regarding "Thermo K click" changes.
Do you want to unsubscribe in order to stop receiving notifications regarding "Thermo K click" changes.
Do you want to report abuse regarding "Thermo K click".
Library Description
The library covers all the necessary functions to control the Thermo K Click board.
Library performs the communication with the device via I2C driver by writing to registers and by reading from registers. Library set/get configuration, for set/get status, for set/get alert ( 1, 2, 3 or 4 ) status, enable/disable alerts, for measuring temperature and convert the data ( Celsius or Fahrenheit ), etc.
Key functions:
float thermok_getTemperatureFahrenheit()
- Get temperature ( Fahrenheit ) function.Examples description
The application is composed of three sections:
void applicationTask() { temperature = thermok_getTemperature(); Delay_ms( 100 ); FloatToStr( temperature, logText ); mikrobus_logWrite( " Temperature : ", _LOG_TEXT ); mikrobus_logWrite( logText, _LOG_TEXT ); mikrobus_logWrite( degCel, _LOG_LINE ); mikrobus_logWrite( "---------------------------", _LOG_LINE ); Delay_ms( 3000 ); }
Other mikroE Libraries used in the example:
I2C
UART
Conversion
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 click or RS232 click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message