We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Rating:
Author: MIKROE
Last Updated: 2019-04-18
Package Version: 1.0.0.0
mikroSDK Library: 1.0.0.0
Category: Temperature & humidity
Downloaded: 3898 times
Not followed.
License: MIT license
Temp-hum 11 click is a temperature and humidity sensing Click board, equipped with the HDC1080, a high accuracy digital humidity, and temperature sensor.
Do you want to subscribe in order to receive notifications regarding "Temp-Hum 11 click" changes.
Do you want to unsubscribe in order to stop receiving notifications regarding "Temp-Hum 11 click" changes.
Do you want to report abuse regarding "Temp-Hum 11 click".
Library Description
The library initializes and defines the I2C bus driver and drivers that offer a choice for reads data form register. The library includes function for read Temperature and Relative Huminidy data and function for read device ID, Manifactures ID and Serial ID data. The user also has the function for configuration chip for measurement.
Key functions:
void temphum11_configuration(uint16_t config)
- Functions for configuration device for measurement.float temphum11_getTemperature(uint8_t tempIn)
- Functions for read Temperature data.float temphum11_getHumidity()
- Functions for read Relative Huminidy data.Examples description
The application is composed of the three sections :
void applicationTask()
{
float Temperature;
float Humidity;
char demoText[ 50 ];
Temperature = temphum11_getTemperature(_TEMPHUM11_TEMP_IN_CELSIUS);
FloatToStr(Temperature, demoText);
mikrobus_logWrite(" Temperature : ", _LOG_TEXT);
mikrobus_logWrite(demoText, _LOG_LINE);
Humidity = temphum11_getHumidity();
FloatToStr(Humidity, demoText);
mikrobus_logWrite(" Humidity : ", _LOG_TEXT);
mikrobus_logWrite(demoText, _LOG_LINE);
mikrobus_logWrite("-----------------", _LOG_LINE);
Delay_ms( 1500 );
}
Other mikroE Libraries used in the example:
I2C
UART
Conversions
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 click or RS232 click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message.