We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Rating:
Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.13
mikroSDK Library: 2.0.0.0
Category: Current sensor
Downloaded: 150 times
Not followed.
License: MIT license
Hall Current Click is a compact add-on board that contains a precise solution for AC/DC current sensing. This board features the TLI4970-D050T4, a 16-bit digital SPI output (13-bit current value) coreless magnetic current sensor designed for the current range of ±25A from Infineon Technology. A differential measurement principle allows effective stray field suppression with a highly linear output signal without hysteresis. Due to the integrated primary conductor (current rail), there is no need for external calibration. The TLI4970-D050T4 is highly accurate over temperature range and lifetime with fast overcurrent detection with a configurable threshold.
Do you want to subscribe in order to receive notifications regarding "Hall Current Click" changes.
Do you want to unsubscribe in order to stop receiving notifications regarding "Hall Current Click" changes.
Do you want to report abuse regarding "Hall Current Click".
DOWNLOAD LINK | RELATED COMPILER | CONTAINS |
---|---|---|
3319_hall_current_cli.zip [555.73KB] | mikroC AI for ARM GCC for ARM Clang for ARM mikroC AI for PIC mikroC AI for PIC32 XC32 GCC for RISC-V Clang for RISC-V mikroC AI for AVR mikroC AI for dsPIC XC16 |
|
Hall Current Click is a compact add-on board that contains a precise solution for AC/DC current sensing. This board features the TLI4970-D050T4, a 16-bit digital SPI output (13-bit current value) coreless magnetic current sensor designed for the current range of ±25A from Infineon Technology. A differential measurement principle allows effective stray field suppression with a highly linear output signal without hysteresis. Due to the integrated primary conductor (current rail), there is no need for external calibration. The TLI4970-D050T4 is highly accurate over temperature range and lifetime with fast overcurrent detection with a configurable threshold.
We provide a library for the HallCurrent Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.
This library contains API for HallCurrent Click driver.
hallcurrent_cfg_setup
Config Object Initialization function.
void hallcurrent_cfg_setup ( hallcurrent_cfg_t *cfg );
hallcurrent_init
Initialization function.
err_t hallcurrent_init ( hallcurrent_t *ctx, hallcurrent_cfg_t *cfg );
hallcurrent_read_data
Generic read 16-bit data function
uint16_t hallcurrent_read_data ( hallcurrent_t *ctx );
hallcurrent_check_status
Check status of read data function.
uint8_t hallcurrent_check_status ( hallcurrent_t *ctx );
hallcurrent_read_current
Read electric current function
float hallcurrent_read_current ( hallcurrent_t *ctx );
The application is current sensor.
The demo application is composed of two sections :
Initialization driver enable's - SPI and start write log.
void application_init ( void )
{
log_cfg_t log_cfg;
hallcurrent_cfg_t cfg;
/**
* Logger initialization.
* Default baud rate: 115200
* Default log level: LOG_LEVEL_DEBUG
* @note If USB_UART_RX and USB_UART_TX
* are defined as HAL_PIN_NC, you will
* need to define them manually for log to work.
* See @b LOG_MAP_USB_UART macro definition for detailed explanation.
*/
LOG_MAP_USB_UART( log_cfg );
log_init( &logger, &log_cfg );
log_info( &logger, "---- Application Init ----" );
// Click initialization.
hallcurrent_cfg_setup( &cfg );
HALLCURRENT_MAP_MIKROBUS( cfg, MIKROBUS_1 );
hallcurrent_init( &hallcurrent, &cfg );
HALLCURRENT_SET_DATA_SAMPLE_EDGE;
log_printf( &logger,"------------------------\r\n" );
log_printf( &logger, " Hall Current \r\n" );
log_printf( &logger, "------------------------\r\n" );
}
This is an example which demonstrates the use of Hall Current Click board.
void application_task ( void )
{
log_printf( &logger, " Current : %.3f A \r\n", hallcurrent_read_current( &hallcurrent ) );
log_printf( &logger, "------------------------\r\n" );
Delay_ms ( 1000 );
}
The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.
Other mikroE Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART Click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.