We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.7
mikroSDK Library: 2.0.0.0
Category: RS485
Downloaded: 96 times
Not followed.
License: MIT license
Download [488.11KB]RS485 7 Click is a compact add-on board that enables communication over an RS485 network. This board features the THVD1424, a full duplex RS485 transceiver with a selectable data rate from Texas Instruments. The THVD1424 offers several pin-controlled features, including an on-chip 120Ω termination resistor, slew rate control, and the ability to switch between half and full duplex mode. With its high immunity to IEC Contact Discharge ESD events, the bus pins require no additional system-level protection components. Additionally, the chip is known for its low power consumption and glitch-free power-up/power-down functionality, which enables hot plug-in capability.
[learn more]
Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.7
mikroSDK Library: 2.0.0.0
Category: LED Drivers
Downloaded: 120 times
Not followed.
License: MIT license
Download [565.08KB]LED Driver 17 Click is a compact add-on board that offers a simple solution for controlling multiple LEDs, making it an ideal choice for various applications. This board features the LTR3755, a highly efficient DC/DC controller from Analog Devices that operates as a constant-current source. It can easily drive high current LEDs and features onboard low-side external N-channel power MOSFETs driven from an internal regulated supply. The LED Driver 17 Click is capable of stable operation over a wide supply range and offers several LED protection features, including overvoltage and overcurrent protection. Additionally, the frequency adjust pin allows users to program the switching frequency from 100kHz to 1MHz, optimizing efficiency and performance.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.7
mikroSDK Library: 2.0.0.0
Category: Brushed
Downloaded: 62 times
Not followed.
License: MIT license
Download [397.88KB]DC Motor 25 Click is a compact add-on board with a brushed DC motor driver. This board features the A3908, a low-voltage bidirectional DC motor driver from Allegro Microsystems. The A3908 is rated for an operating voltage range compatible with mikroBUS™ power rails and output currents up to 500mA. The unique output full-bridge incorporates source-side linear operation to allow a constant voltage across the motor coil. Logic input pins are provided to control the motor direction of rotation, brake, and standby modes. It also has complete protection capabilities supporting robust and reliable operation.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.7
mikroSDK Library: 2.0.0.0
Category: Linear
Downloaded: 83 times
Not followed.
License: MIT license
Download [584.42KB]LDO Click is a compact add-on board designed to regulate the output voltage of a power supply to a lower level with a very low dropout voltage. This board features the TPS7A83A, a low-noise, low-dropout linear regulator (LDO) from Texas Instruments capable of sourcing 2A with only 200mV of maximum dropout. The TPS7A8300A has a pin-programmable output voltage from 0.8V-3.95V with a 50mV resolution, or it can be adjustable from 0.8V-5.2V using an external resistor divider.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.7
mikroSDK Library: 2.0.0.0
Category: USB-C PD
Downloaded: 155 times
Not followed.
License: MIT license
Download [790.26KB]USB-C Power Click is a compact add-on board that provides a quick and easy way to supply power without carrying multiple adapters or cables. This board features the TPS25750S, a highly integrated USB Type-C and Power Delivery (PD) controller with integrated power switches optimized for power applications from Texas Instruments. The TPS25750S integrates fully managed power paths (5V/3A with 36mΩ sourcing switch) with robust protection (reverse and inrush current as well as over/under voltage protection) and control for external battery charger IC for a complete USB-C PD solution. Besides web-based GUI and pre-configured firmware, the TPS25750S also has some GPIOs and LED indicators that are user-defined for either status or control information.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.7
mikroSDK Library: 2.0.0.0
Category: Power Switch
Downloaded: 124 times
Not followed.
License: MIT license
Download [613.24KB]HW Monitor Click is a compact add-on board used to monitor and regulate the performance of various hardware components within an embedded system. This board features the LM96080, an I2C-configurable system hardware monitor from Texas Instruments that contains a 10-bit delta-sigma ADC capable of measuring seven positive voltages and local temperature. The LM96080 also has two programmable fan speed monitoring inputs besides other hardware monitoring functions like chassis intrusion detection, additional external interrupt input, master reset for external purposes, as well as a sequencer that performs watchdog window comparisons of all measured values.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.10
mikroSDK Library: 2.0.0.0
Category: Temperature & humidity
Downloaded: 139 times
Not followed.
License: MIT license
Download [451.11KB]Temp-Log 7 Click is a compact add-on board used to measure and record the temperature of an environment over time. This board features the TMP1826, a high-accuracy, 1-Wire® compatible digital output temperature sensor from Texas Instruments with integrated 2-kbit EEPROM. It supports a wide operating temperature range from –20°C to +85°C with its high accuracy of ±0.1°C (typical)/±0.3°C (maximum) and comes with a factory-programmed 64-bit unique identification number for addressing and NIST traceability. Besides a programmable alarm function that outputs an interrupt signal to the MCU when a specific temperature event occurs, it also has three digital I/O pins configurable for general purposes or to identify the device's position on a shared bus.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.7
mikroSDK Library: 2.0.0.0
Category: EEPROM
Downloaded: 141 times
Not followed.
License: MIT license
Download [423.11KB]EEPROM 9 Click is a compact add-on board with a highly reliable nonvolatile memory solution. This board features the M95P32-I, the 32Mbit electrically erasable programmable memory with enhanced hardware write protection from STMicroelectronics.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.9
mikroSDK Library: 2.0.0.0
Category: Port expander
Downloaded: 132 times
Not followed.
License: MIT license
Download [519.48KB]Expand 15 Click is a compact add-on board that contains a multi-channel I/O expander. This board features the TCAL6416, a general-purpose I/O expansion for most microcontroller families from Texas Instruments.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.7
mikroSDK Library: 2.0.0.0
Category: Pressure
Downloaded: 106 times
Not followed.
License: MIT license
Download [422.02KB]Barometer 10 Click is a compact add-on board that measures air pressure in a specific environment. This board features the LPS28DFW, an ultra-compact piezoresistive absolute pressure sensor that functions as a digital output barometer from STMicroelectronics. The LPS28DFW comprises a sensing element and an IC chip for signal processing in one package, converts pressure into a 24-bit digital value, and sends the information via I2C serial interface. It has a selectable dual full-scale absolute pressure range of up to 1260hPa and 4060hPa, with an absolute pressure accuracy of 0.5hPa over a wide operating temperature range.
[learn more] 
