We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.2
mikroSDK Library: 2.0.0.0
Category: Signal processing
Downloaded: 14 times
Not followed.
License: MIT license
Download [605.80KB]Rec&Play 2 Click is a compact add-on board for voice recording and playback applications. It is based on the ISD1616B, a single-message voice record and playback IC from Nuvoton. The board features an on-chip oscillator, a microphone preamplifier with Automatic Gain Control (AGC), an omnidirectional microphone, and a speaker driver for high-quality audio recording and playback. Voice data is stored in onboard Flash memory without digital compression, ensuring clear and reliable sound. It supports both manual and digital control, as well as flexible message durations from 10 to 26 seconds.
[learn more]
Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.2
mikroSDK Library: 2.0.0.0
Category: Optical
Downloaded: 12 times
Not followed.
License: MIT license
Download [444.92KB]Ambient 14 Click is a compact add-on board for ambient light and proximity detection applications. This board features the TMD2755, an advanced sensor from ams OSRAM, which combines ambient light sensing (ALS) and proximity detection in a single, compact module. The TMD2755 features an integrated infrared VCSEL and driver and a proximity engine that includes offset adjustment and ambient light subtraction for enhanced accuracy. It provides 16-bit data output for ALS and proximity detection, allowing precise control of backlight brightness in devices.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.3
mikroSDK Library: 2.0.0.0
Category: Boost
Downloaded: 30 times
Not followed.
License: MIT license
Download [615.09KB]BATT Boost 2 Click is a compact add-on board designed to extend the battery life of non-rechargeable, primary batteries in low-voltage, low-power applications. This board features the NBM7100A, a coin-cell battery-life booster with adaptive power optimization from Nexperia. The NBM7100A integrates two high-efficiency DC-DC conversion stages and an intelligent learning algorithm to optimize energy usage, allowing it to handle bursts of current up to 200mA without depleting the battery. It features two output terminals: VDH for high pulse load applications and VDP for powering 'Always-ON' components. Communication with the host MCU is achieved via the I2C interface, supporting up to 1MHz clock frequencies.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.2
mikroSDK Library: 2.0.0.0
Category: LED matrix
Downloaded: 19 times
Not followed.
License: MIT license
Download [521.01KB]2x4 RGB Click is a compact add-on board for dynamic and colorful lighting control. This board features an array of 2x4 RGB LEDs (WL-ICLED 1312121320437) from Würth Elektronik, featuring individual control of each red, green, and blue component via an integrated IC and pulse width modulation (PWM) technology. The board also includes an LSF0102 voltage translator, ensuring seamless operation with both 3.3V and 5V logic systems, and supports MIKROE’s innovative Click Snap feature for flexible installation options. With its precise color control and flexible design, 2x4 RGB Click is ideal for applications such as ambient lighting, displays, and visual indicators in various consumer electronics and industrial environments.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.2
mikroSDK Library: 2.0.0.0
Category: Sub-1 GHz Transceivers
Downloaded: 17 times
Not followed.
License: MIT license
Download [628.62KB]M-BUS RF 3 Click is a compact add-on board designed for utility metering and various telemetry applications. This board features the Metis-II (2607021183000), an 868MHz radio module from Würth Elektronik. It integrates an MSP430 microcontroller and a CC1125 RF chip-set to ensure efficient data transmission. Key features include a frequency range of 868.3MHz to 869.525MHz, support for the Wireless M-BUS EN13757-4:2013 and Open Metering System (OMS) standards, and communication capabilities up to 1000 meters in line-of-sight conditions. The board also offers energy-saving functionalities such as Wake-On-Radio, an output power of +14dBm output, and AES-128 encryption for secure communication.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.2
mikroSDK Library: 2.0.0.0
Category: Current sensor
Downloaded: 23 times
Not followed.
License: MIT license
Download [488.81KB]Current 10 Click is a compact add-on board designed for reliable current measurements. This board features the CT455, an XtremeSense™ TMR coreless current sensor from Allegro Microsystems, with a wide 1MHz bandwidth and a sensitivity of 333.3mV/mT, capable of detecting both positive and negative current flows (±6mT). It translates magnetic fields into a linear analog output with less than ±1.0% error across temperature and supply voltage variations.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.2
mikroSDK Library: 2.0.0.0
Category: Temperature & humidity
Downloaded: 25 times
Not followed.
License: MIT license
Download [421.34KB]IR Thermo 4 Click is a compact add-on board for precise remote sensing applications. This board features the TPiS 1T 1386 L5.5 H thermopile sensor from Excelitas, known for its high accuracy and narrow 5° field of view (FoV). This sensor, part of the CaliPile™ family, features factory-calibrated data stored in EEPROM, ensuring reliable and accurate performance. The sensor also comes in an isothermal TO-39 package with an integrated lens hood for minimized stray light and enhanced thermal stability, making it ideal for challenging environmental conditions. With a built-in ADC and multiple filter options, the sensor's data is easily accessible via an I2C interface. IR Thermo 4 Click is well-suited for remote skin temperature monitoring, over-temperature protection, human presence sensing, and motion detection.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.2
mikroSDK Library: 2.0.0.0
Category: Speakers
Downloaded: 24 times
Not followed.
License: MIT license
Download [522.16KB]Buzzer Click is a compact add-on board for generating sound signals in various electronic applications. This board features the CPT-7502-65-SMT-TR, a piezoelectric buzzer transducer from CUI Devices, known for its efficient sound output and compact surface-mount design. The buzzer offers a sound pressure level of 65dB and consumes only 1mA of current, making it ideal for battery-powered devices. The board also features the MIKROE 'Click Snap' function, allowing for flexible installation and autonomous operation.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.4
mikroSDK Library: 2.0.0.0
Category: WIFI
Downloaded: 15 times
Not followed.
License: MIT license
Download [663.89KB]Calypso Click is a compact add-on board for wireless connectivity in embedded applications. This board features the WIRL-WIFS Calypso WLAN module (2610011025000) from Würth Elektronik, which supports IEEE 802.11 b/g/n standards and includes a fully integrated TCP/IP stack. It also features edge castellated connections, a smart antenna configuration, and supports both IPv4 and IPv6 protocols, including SNTP, DHCP, mDNS, HTTP(S), and MQTT, offering secure connectivity with six simultaneous secure sockets, secure boot, and OTA updates.
[learn more] Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.2
mikroSDK Library: 2.0.0.0
Category: DAC
Downloaded: 23 times
Not followed.
License: MIT license
Download [535.95KB]DAC 18 Click is a compact add-on board for converting general-purpose input to PWM signals. This board features the DAC539G2-Q1, a 10-bit smart DAC from Texas Instruments. The board offers two key output channels: one for digital-to-analog conversion (OUT1) and the other for voltage-to-PWM conversion (OUT0) supporting triangle or sawtooth waveforms. It features an operational mode selection pin for I2C programming or standalone operation, along with nonvolatile memory for storing register settings. DAC 18 Click is ideal for automotive lighting systems and industrial environments requiring reliable signal conversion.
[learn more] 
