We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.9
mikroSDK Library: 2.0.0.0
Category: Port expander
Downloaded: 75 times
Not followed.
License: MIT license
Download [643.52KB]DIGI IN Click is a compact add-board that converts industrial inputs into serialized SPI-compatible output. This board features the MAX22199, an octal industrial digital input from Analog Devices. It stands out for its compliance with the IEC 61131-2 standard, ensuring reliability and efficiency.
[learn more]Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.6
mikroSDK Library: 2.0.0.0
Category: Adapter
Downloaded: 73 times
Not followed.
License: MIT license
Download [643.23KB]EasyPull Click is a compact add-on board designed to easily configure mikroBUS™ signals into pull-up or pull-down states, perfect for various applications. It features a universal setup with 4.7kΩ resistors to ensure stable performance across vital communication lines such as SPI, UART, I2C, and standard mikroBUS™ signals (AN, RST, PWM, INT).
[learn more]Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.4
mikroSDK Library: 2.0.0.0
Category: LIN
Downloaded: 43 times
Not followed.
License: MIT license
Download [516.47KB]MCP2003B Click is a compact add-on board with a physical interface to automotive and industrial LIN systems compliant with the LIN Bus Specification Revision 2.2, SAE J2602, and ISO 17987. This board features the MCP2003B, a LIN transceiver from Microchip. The LIN, which stands for a Local Interconnect Network, is used in conjunction with the CAN interface for communication between the components inside of vehicles. The MCP2003B is a bi-directional half-duplex LIN transceiver that supports baud rates up to 20Kbaud with a LIN-compatible output driver. According to the standard on which this LIN transceiver works, connecting up to 15 peripheral devices to a single controller device is possible.
[learn more]Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.6
mikroSDK Library: 2.0.0.0
Category: Port expander
Downloaded: 50 times
Not followed.
License: MIT license
Download [501.03KB]Expand 16 Click is a compact add-on board with a multi-port I/O expander. This board features the FLX6408, a fully configurable 8-bit GPIO expander from ON Semiconductor. It brings eight independently configurable input/output ports, with a 6mA output drive, when configured in the output mode.
[learn more]Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.4
mikroSDK Library: 2.0.0.0
Category: USB
Downloaded: 56 times
Not followed.
License: MIT license
Download [608.91KB]FTDI Click is a compact add-on board that provides a high-speed USB to a serial interface converter. This board features the FT2232H, a 5th-generation high-speed USB 2.0 to a serial UART/I2C/SPI interface converter from FTDI. The entire USB protocol is handled on the chip (FTDI USB drivers required), making this board ideal for various USB applications. Besides a selectable interface and a standalone operation possibility, it also includes an EEPROM which contains the USB configuration descriptors for the FT2232H and one DA converter for additional reference in user-configurable applications.
[learn more]Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.5
mikroSDK Library: 2.0.0.0
Category: 1-Wire
Downloaded: 58 times
Not followed.
License: MIT license
Download [493.68KB]iButton Click - is an iButton™ probe Click board™. The iButton is a Analog Devices technology based on Analog's 1-Wire® communication protocol, and a chip usually packed in a robust stainless steel casing. The button-shaped iButton device has two contacts - the lid and the base. These contacts carry the necessary connections down to a sensitive silicone chip, embedded inside the metal button. When the iButton touches the reader probe on the Click board™, it establishes the communication with the host MCU, via the 1-Wire® interface. The communication is almost instant, so it is enough to press the iButton lightly to the probe contacts.
[learn more]Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.4
mikroSDK Library: 2.0.0.0
Category: Port expander
Downloaded: 40 times
Not followed.
License: MIT license
Download [485.91KB]Expand 3 Click is a compact add-on board providing general-purpose I/O expansion. This board features the DS2408, an 8-channel programmable I/O expander from Analog Devices. The DS2408 has a factory-lasered 64-bit registration number, enabling multiple Expand 3 Click boards™ to be connected on the same data line, communicating with the host MCU through a standard Dallas Semiconductor 1-Wire interface (15.3kbps or 100kbps). PIO outputs are configured as open-drain and provide a maximum on-resistance of 100Ω.
[learn more]Author: MIKROE
Last Updated: 2024-07-09
Package Version: 2.0.0.7
mikroSDK Library: 2.0.0.0
Category: CAN
Downloaded: 81 times
Not followed.
License: MIT license
Download [9.23KB]Author: MIKROE
Last Updated: 2024-07-09
Package Version: 2.0.0.5
mikroSDK Library: 2.0.0.0
Category: CAN
Downloaded: 75 times
Not followed.
License: MIT license
Download [8.63KB]Author: MIKROE
Last Updated: 2024-10-31
Package Version: 2.1.0.5
mikroSDK Library: 2.0.0.0
Category: 1-Wire
Downloaded: 40 times
Not followed.
License: MIT license
Download [437.73KB]1-Wire I2C Click carries DS28E17 1-Wire-to-I2C master bridge from Analog Devices.
[learn more]