We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
posted on 2014/06/25 07:49:48 PM CEST
PLEASE HELP ME BUILD AUTOMATIC EGG INCUBATOR AROUND PIC 18F2550/PIC16F73/PIC16F88/ATMEGA32
1. AUTOMATIC EGG TURNER
2.HUMIDITY TEMPERATURE CONTROL
3.LCD DISPLAY
4.HUMAN INTERFACE/KEY
5.FIRMWARE/HARDWARE
6.OPERATION/PROCEDURES
WITH MUCH THANKS
DANIEL
posted on 2014/06/25 06:15:04 PM CEST
SCROLLING DISPLAY.
1.PIC16F88
2.M74HC595BL
3.ULN2003APG
4.8X8X8LED
The scrolling display run from right to left with capability of vary speed from first to slow.
Memory capacity 250MB about 300 characters upper and lower case including spacing.
Editing, capability possible to editite a single word without deleting the entire message.
MODE OF OPERATIONS.
1. To enter program mode plug in the keyboard to the display keyboar jack, press the escape key once,
scrolling will stoop all messages will disappear and a flushing cursor will display as dash.......You can now type the message that you want press caps lock for upper and lower case and space bar for spacing, enter to finish.
2. now the display is on programming mode and you can write anew message,all the old message will disappear and new message
will be saved in the display memory.
3. To edit the existing message on the display, enter the program mode ,use the right< and> arrows to move the words
you would like to edit and overwrite when cursor is before it and press enter
4. To vary scroll speed press f1 key repeatedly when display is running until the desired speed is achieved ,press f2 repeatedly to decrease speed.
I have trying to build this project without success.
CAN ANYONE COME TO MY HELP
LOOKING FOR FIRMWARE AND HARDWARE
PLEASE I NEED YOUR HELP
THANKS IN ADVANCE
Daniel
posted on 2014/06/17 01:22:16 PM CEST
accelerometer sample code for mikromedia 5 for tiva in mikrobasic pro for arm
posted on 2014/06/14 07:25:12 PM CEST
Hi All...
I need HTTP server to be in PIC18F45K22 and connected to Serial Ethernet Board.........I used the board and it is works successfully with PIC16F877A & PIC16F887 but it did not work with PIC18F45K22
Thanks
posted on 2014/06/09 03:22:51 PM CEST
hi everybody
i need code for driving servor motor (5v) using pic 18f45k22 at 8MHz at low frequency (50 Hz) and PWM is not support low frequency any help is appreciated
thanks for all
